You are here: Home » Products » Patch Panels » 24 Ports CAT. 5E&6 FTP Patch Panel
Share to:

24 Ports CAT. 5E&6 FTP Patch Panel

  • DW-4014

Dowell Category 5e/6 Shielded Patch Panels comply with the requirements of the Category 5e/6 specification. Each panel is designed to be quick and easy to install and maintain, with 24 Ports per 1U of rack space. A built in rear management tray, fulfils a number of functions: firstly, it relieves any stress that may be applied to the cable during and after installation; to allow trouble free termination the IDC blocks are positioned on the tray, at a 90 degree angle to the RJ45 sockets; finally at the rear of each tray, an adjustable clamping plate provides a quick and effective grounding position for the cables entering the panel. A screw on top plate, is supplied to complete the installation.

Performance / Specification Table
Specification:   Category 5e /6
Wiring Specification:   T568A & T568B
Port Density :   24 Ports Per 1U (44mm)
Dimensions :   480mm wide x 102mm deep x 44mm high
RJ45 Jack:     Min life 700 insertions
RJ45 Jack:   50 Micro-inch Gold Plated contact pins
IDC Contacts:   Suitable for Krone/110 Termination
Contact compatibility:   22 to 26AWG Solid & 24AWG Stranded wires
Operating temperature range: -10°C to 60°C
Storage temperature range: -40°C to 68°C
Panel Material: SPCC -Black Powder Painting Coat Finish
Shielded Case: Copper C2680
Jack Housing: PBT PA-66 High Impact UL94V-0 Thermoplastic, 25% Glass Fibre Filled
IDC Plastic: Polycarbonate High Impact UL94V-0 Thermoplastic
NEXT at 100MHz Category 5e 40dB @100MHz (Power Sum)
FEXT at 100MHz Category 5e 32dB @100MHz (Power Sum)

 Email:   Tel: +86 574 27877377   Add: 15th Floor, Aolisai Building, No. 958, Qianhu North Road, Ningbo 315100, China.

Copyright 2004-2021 Dowell Industry Group Co., Ltd. All Rights Reserved. Sitemap | XML