 |
Dowell Category 5e/6 Shielded Patch Panels comply with the requirements of the Category 5e/6 specification. Each panel is designed to be quick and easy to install and maintain, with 24 Ports per 1U of rack space. A built in rear management tray, fulfils a number of functions: firstly, it relieves any stress that may be applied to the cable during and after installation; to allow trouble free termination the IDC blocks are positioned on the tray, at a 90 degree angle to the RJ45 sockets; finally at the rear of each tray, an adjustable clamping plate provides a quick and effective grounding position for the cables entering the panel. A screw on top plate, is supplied to complete the installation.
| Performance / Specification Table | |
| Specification: | Category 5e /6 |
| Wiring Specification: | T568A & T568B |
| Port Density : | 24 Ports Per 1U (44mm) |
| Dimensions : | 480mm wide x 102mm deep x 44mm high |
| RJ45 Jack: | Min life 700 insertions |
| RJ45 Jack: | 50 Micro-inch Gold Plated contact pins |
| IDC Contacts: | Suitable for Krone/110 Termination |
| Contact compatibility: | 22 to 26AWG Solid & 24AWG Stranded wires |
| Operating temperature range: | -10°C to 60°C |
| Storage temperature range: | -40°C to 68°C |
| Panel Material: | SPCC -Black Powder Painting Coat Finish |
| Shielded Case: | Copper C2680 |
| Jack Housing: | PBT PA-66 High Impact UL94V-0 Thermoplastic, 25% Glass Fibre Filled |
| IDC Plastic: | Polycarbonate High Impact UL94V-0 Thermoplastic |
| NEXT at 100MHz Category 5e 40dB @100MHz (Power Sum) | |
| FEXT at 100MHz Category 5e 32dB @100MHz (Power Sum) | |
Dowell Category 5e/6 Shielded Patch Panels comply with the requirements of the Category 5e/6 specification. Each panel is designed to be quick and easy to install and maintain, with 24 Ports per 1U of rack space. A built in rear management tray, fulfils a number of functions: firstly, it relieves any stress that may be applied to the cable during and after installation; to allow trouble free termination the IDC blocks are positioned on the tray, at a 90 degree angle to the RJ45 sockets; finally at the rear of each tray, an adjustable clamping plate provides a quick and effective grounding position for the cables entering the panel. A screw on top plate, is supplied to complete the installation.
| Performance / Specification Table | |
| Specification: | Category 5e /6 |
| Wiring Specification: | T568A & T568B |
| Port Density : | 24 Ports Per 1U (44mm) |
| Dimensions : | 480mm wide x 102mm deep x 44mm high |
| RJ45 Jack: | Min life 700 insertions |
| RJ45 Jack: | 50 Micro-inch Gold Plated contact pins |
| IDC Contacts: | Suitable for Krone/110 Termination |
| Contact compatibility: | 22 to 26AWG Solid & 24AWG Stranded wires |
| Operating temperature range: | -10°C to 60°C |
| Storage temperature range: | -40°C to 68°C |
| Panel Material: | SPCC -Black Powder Painting Coat Finish |
| Shielded Case: | Copper C2680 |
| Jack Housing: | PBT PA-66 High Impact UL94V-0 Thermoplastic, 25% Glass Fibre Filled |
| IDC Plastic: | Polycarbonate High Impact UL94V-0 Thermoplastic |
| NEXT at 100MHz Category 5e 40dB @100MHz (Power Sum) | |
| FEXT at 100MHz Category 5e 32dB @100MHz (Power Sum) | |
