 |
DW-SW7195LB
Dowell
DW-SW7195LB
360 x 207 x 58 mm
AluminumAlloy & Stainless Steel
For deadending and stress relief of service entrance/drop installations.
DW-SW7195LB Wedge Clamp
Designed for PartialTensionApplications.
Available in Multiple Styles and Bail Lengths.
Irridated FinishAvailable for Contaminated Areas.
Flexible Bail Versions for Use with Hooks and Eyes.
For deadending and stress relief of service entrance/drop installations.
For use withACSR,AAC, &AAAC conductors.
Service wedge to be attached to bare neutral.
Rigid stainless steel bails are for use with eye hooks and insulators with diameters larger than 1.5βin diameter.
Flexible bails are for use with hooks and small eyes.
Design allows for easy sag adjustments.
Service wedges are not full tension devices (see tensile rating). May be used in slack span applications.
Each wedge has two tape bands.
The warning label is always orange (outside band).
The size indicator is color coded as listed below (inside band,closest to bail).
Locking mechanism secures latch on the rigid bail to prevent opening during installation.
| Body Material | Aluminum Alloy | Bail Wire Material | Stainless Steel |
| Body Strength LBS. (kN) | 1000(4.5) | Color | Orange |
| Size | 360 x 207 x 58 mm | DIA. Range IN(MM) | 4.7~8.4 |
DW-SW7195LB Wedge Clamp
Designed for PartialTensionApplications.
Available in Multiple Styles and Bail Lengths.
Irridated FinishAvailable for Contaminated Areas.
Flexible Bail Versions for Use with Hooks and Eyes.
For deadending and stress relief of service entrance/drop installations.
For use withACSR,AAC, &AAAC conductors.
Service wedge to be attached to bare neutral.
Rigid stainless steel bails are for use with eye hooks and insulators with diameters larger than 1.5βin diameter.
Flexible bails are for use with hooks and small eyes.
Design allows for easy sag adjustments.
Service wedges are not full tension devices (see tensile rating). May be used in slack span applications.
Each wedge has two tape bands.
The warning label is always orange (outside band).
The size indicator is color coded as listed below (inside band,closest to bail).
Locking mechanism secures latch on the rigid bail to prevent opening during installation.
| Body Material | Aluminum Alloy | Bail Wire Material | Stainless Steel |
| Body Strength LBS. (kN) | 1000(4.5) | Color | Orange |
| Size | 360 x 207 x 58 mm | DIA. Range IN(MM) | 4.7~8.4 |
