You are here: Home » Products » Patch Panels » End pass through RJ45 UTP modular plug
This product has been off the shelf!
Share to:

End pass through RJ45 UTP modular plug

  • DW-EZ-RJ45U

The pass through RJ45 modular plug design to save time with your CAT5E/CAT6 installations. This connector allows the wires to be pulled through the connector in an efficient manner, while maintaining high signal integrity.

1. pass through RJ45 modular plug design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
2. Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
3. Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
4. Significantly improve Shannon capacity.
5. Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.

 Email:   Tel: +86 574 27877377   Add: 15th Floor, Aolisai Building, No. 958, Qianhu North Road, Ningbo 315100, China.

Copyright 2004-2019 Dowell Industry Group Co., Ltd. All Rights Reserved. Sitemap | XML