DW-2228 2228 Electrical Insulating Thick Rubber Adhesive Vinyl Waterproof Electrical Tape
Product Description
2228 is a conformable self–fusing rubber electrical insulating and sealing tape. 2228 consists of an ethylene propylene rubber (EPR) backing coated with an aggressive, temperature–stable mastic adhesive. The tape is made 65 mils (1,65 mm) thick for quick application build–up. It is designed for electrical insulating and moisture sealing applications.
2228 can be used on copper or aluminum conductors rated at 90°C, with an emergency overload rating of 130°C. It offers excellent resistance to moisture and ultraviolet exposure and is intended for both indoor and weather exposed outdoor applications.
| Typical Data | |
| Temperature Rating: | 194°F (90°C) |
| Color | Black |
| Thickness | 65 mils (1,65 mm) |
| Adhesion | Steel 15.0lb/in (26,2N/10mm) PE 10.0lb/in (17,5N/10mm) |
| Fusion | Type I Pass |
| Tensile Strength | 150psi (1,03N/mm^2) |
| Elongation | 1000% |
| Dielectric Breakdown | Dry 500v/mil (19,7kv/mm) Wet 500v/mil (19,7kv/mm) |
| Dielectric Constant | 3.5 |
| Dissipation Factor | 1.0% |
| Water Absorption | 0.15% |
| Water Vapor Transmission Rate | 0.1g/100in^2/24hr |
| Ozone Resistance | Pass |
| Heat Resistance | Pass, 130°C |
| UV Resistance | Pass |
- Conformable for application over irregular surfaces
- Compatible with solid dielectric cable insulations
- Self–fusing tape
- Flexible over wide temperature range
- Excellent weather and moisture resistance
- Excellent adhesion and sealing characteristics with copper,aluminum and power cable jacket materials.
- Thick construction allows quick application build–up and padding over irregular connections
- Primary electrical insulation for cable and wire connections rated up to 1000 volts
- Electrical insulation and vibration padding for motor leads rated up to 1000 volts
- Primary electrical insulation for bus bar connections rated up to 35 kv
- Padding for irregular shaped bus bar bolted connections
- Moisture seal for cable and wire connections
- Moisture seal for service
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below