 |
● Material UV Resistant Nylon, Lifespan:25 Years.
● Drop Wire Clamp for managing round drop cables diameter with Ø from 2 to 8mm.
● Dead-ending of round drop cable on poles and buildings.
● Suspension of drop cable at intermediate poles by using 2 drop clamps.
● Effective and cost-efficient for cabling.
● Installation within a couple of seconds, requiring no tools
● Suspension clamps offer more protection to prevent aeolian vibrations
DW-1097
Drop Wire Suspension Clamp is designed with a hinged plastic shell equipped with an elastomer protective insert and an opening bail. The Drop Wire Suspension Clamp’s body locks with 2 built-in clips, while the integrated cable tie allows securing the clamp once closed. Drop Wire Suspension Clamp has effective and cost-efficient for cabling.
Material | UV Resistant Nylon |
Cable Diameter | Round Cable 2-7(mm) |
Breaking Force | 0.3kN |
Min. Failing Load | 180 daN |
Weight | 0.012kg |
Fiber Optic Drop Wire Suspension Clamp is used for enabling mobile suspension of round or flat drop cables Ø 2 to 8mm on central poles used for distribution networks with spans up to 70m. For angles superior to 20°, it is recommended to install a double anchor.
Drop Wire Suspension Clamp is designed with a hinged plastic shell equipped with an elastomer protective insert and an opening bail. The Drop Wire Suspension Clamp’s body locks with 2 built-in clips, while the integrated cable tie allows securing the clamp once closed. Drop Wire Suspension Clamp has effective and cost-efficient for cabling.
Material | UV Resistant Nylon |
Cable Diameter | Round Cable 2-7(mm) |
Breaking Force | 0.3kN |
Min. Failing Load | 180 daN |
Weight | 0.012kg |
Fiber Optic Drop Wire Suspension Clamp is used for enabling mobile suspension of round or flat drop cables Ø 2 to 8mm on central poles used for distribution networks with spans up to 70m. For angles superior to 20°, it is recommended to install a double anchor.
