 |
1.Automatic adjustment to all single, multi and fine-stranded conductors with standard insulation throughout the entire capacity range from 0.03 to 10.0 mm² (AWG 32-7)
2.No damage to the conductors
3.The clamping jaws made of steel hold the cable in a way that prevents slipping without damaging the remaining insulation
4.With recessed wire cutter for Cu and Al conductors, stranded up to 10 mm² and single wire up to 6 mm²
5.Particularly smooth-running mechanics and very low weight
6.Handle with soft-plastic zone for a steady grip
7.Body: plastic, fiberglass-reinforced
8.Blade: special tool steel, oil-hardened
Suitable for | PVC-coated cables |
Working area cross section (min.) | 0.03 mm² |
Working area cross section (max.) | 10 mm² |
Working area cross section (min.) | 32 AWG |
Working area cross section (max.) | 7 AWG |
Length stop (min.) | 3 mm |
Length stop (max.) | 18 mm |
Length | 195 mm |
Weight | 136 g |
1.Automatic adjustment to all single, multi and fine-stranded conductors with standard insulation throughout the entire capacity range from 0.03 to 10.0 mm² (AWG 32-7)
2.No damage to the conductors
3.The clamping jaws made of steel hold the cable in a way that prevents slipping without damaging the remaining insulation
4.With recessed wire cutter for Cu and Al conductors, stranded up to 10 mm² and single wire up to 6 mm²
5.Particularly smooth-running mechanics and very low weight
6.Handle with soft-plastic zone for a steady grip
7.Body: plastic, fiberglass-reinforced
8.Blade: special tool steel, oil-hardened
Suitable for | PVC-coated cables |
Working area cross section (min.) | 0.03 mm² |
Working area cross section (max.) | 10 mm² |
Working area cross section (min.) | 32 AWG |
Working area cross section (max.) | 7 AWG |
Length stop (min.) | 3 mm |
Length stop (max.) | 18 mm |
Length | 195 mm |
Weight | 136 g |
