 |
● Easy operating, the connector can be directly used in ONU, also with fasten strength more than 5 kg, it is widely used in FTTH project of network revolution. It also reduce the use of sockets and adapters, save cost of project.
● With 86 standard socket and adapter, the connector makes connection between drop cable and patch cord. The 86 standard socket provides complete protection with its unique design
DW-FLA
The Mechanical Field-Mountable Fiber Optic Connector (FMC) is designed to simple the connection without fusion splicing machine. This connector is quick assembly which requires only normal fiber preparation tools: cable stripping tool and fiber cleaver.
The connector adopts Fiber Pre-Embedded Tech with superior ceramic ferrule and aluminum alloy V-groove. Also, transparent design of the side cover which allows visual inspection.
Item | Parameter | |
Cable Scope | Ф3.0 mm & Ф2.0 mm Cable | |
Fiber Diameter | 125μm ( 652 & 657 ) | |
Coating Diameter | 900μm | |
Mode | SM | |
Operation Time | about 4min（exclude fiber presetting） | |
Insertion Loss | ≤ 0.3 dB（1310nm & 1550nm）, Max ≤ 0.5 dB | |
Return Loss | ≥50dB for UPC, ≥55dB for APC | |
Success Rate | >98% | |
Reusable Times | ≥10 times | |
Tighten Strength of Bare Fiber | >3N | |
Tensile Strength | >30 N/2min | |
Temperature | -40～+85℃ | |
On-line Tensile Strength Test (20 N) | △ IL ≤ 0.3dB | |
Mechanical Durability（500 times） | △ IL ≤ 0.3dB | |
Drop Test（4m concrete floor, once each direction, three times total） | △ IL ≤ 0.3dB | |
It could be applied to drop cable and indoor cable.Application FTTx，Data Room Transformation.
The Mechanical Field-Mountable Fiber Optic Connector (FMC) is designed to simple the connection without fusion splicing machine. This connector is quick assembly which requires only normal fiber preparation tools: cable stripping tool and fiber cleaver.
The connector adopts Fiber Pre-Embedded Tech with superior ceramic ferrule and aluminum alloy V-groove. Also, transparent design of the side cover which allows visual inspection.
Item | Parameter | |
Cable Scope | Ф3.0 mm & Ф2.0 mm Cable | |
Fiber Diameter | 125μm ( 652 & 657 ) | |
Coating Diameter | 900μm | |
Mode | SM | |
Operation Time | about 4min（exclude fiber presetting） | |
Insertion Loss | ≤ 0.3 dB（1310nm & 1550nm）, Max ≤ 0.5 dB | |
Return Loss | ≥50dB for UPC, ≥55dB for APC | |
Success Rate | >98% | |
Reusable Times | ≥10 times | |
Tighten Strength of Bare Fiber | >3N | |
Tensile Strength | >30 N/2min | |
Temperature | -40～+85℃ | |
On-line Tensile Strength Test (20 N) | △ IL ≤ 0.3dB | |
Mechanical Durability（500 times） | △ IL ≤ 0.3dB | |
Drop Test（4m concrete floor, once each direction, three times total） | △ IL ≤ 0.3dB | |
It could be applied to drop cable and indoor cable.Application FTTx，Data Room Transformation.
