Rack Type PLC splitter is based on silicon dioxide waveguides, which is available to CATV system and used to connect main equipment and terminal equipment in EPON, BPON and GPON network, and it can distribute the light signal uniformly.
1×N (N≥2) PLC Splitter (with Connectors)
Parameter | 1X2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 | |
Wavelength (nm) | 1260 ~ 1650 | ||||||
IL (dB) | ≤4.1 | ≤7.4 | ≤10.5 | ≤13.8 | ≤17.1 | ≤20.4 | |
Uniformity (dB) | ≤0.6 | ≤0.7 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | |
RL (dB) | ≥50 (PC), ≥55 (APC) | ||||||
PDL (dB) | ≤0.15 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 | |
Directivity (dB) | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | |
Environment | Operating temp (℃) | -40~85℃ | |||||
Storage temp (℃) | -40~85℃ | ||||||
Humidity | ≤95% (+40℃) | ||||||
Atmospheric pressure | 62~106kPa | ||||||
Fiber | SM, G657A or Customized | ||||||
Connector | SC, FC |
Remark: Above parameter is result of the test in room temperature, which include the RL of connector.
2×N (N≥2) PLC Splitter (with Connectors)
Parameter | 2X2 | 2x4 | 2x8 | 2x16 | 2x32 | 2x64 | |
Wavelength (nm) | 1260 ~ 1650 | ||||||
IL (dB) | ≤4.4 | ≤7.7 | ≤10.8 | ≤14.1 | ≤17.4 | ≤20.7 | |
Uniformity (dB) | ≤0.6 | ≤0.7 | ≤0.8 | ≤1.2 | ≤1.5 | ≤2.0 | |
RL (dB) | ≥50 (PC), ≥55 (APC) | ||||||
PDL (dB) | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.4 | |
Directivity (dB) | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | |
Environment | Operating temp (℃) | -40~85℃ | |||||
Storage temp (℃) | -40~85℃ | ||||||
Humidity | ≤95% (+40℃) | ||||||
Atmospheric pressure | 62~106kPa | ||||||
Fiber | SM, G657A or Customized | ||||||
Connector | SC, FC |
Remark: Above parameter is result of the test in room temperature, which include the RL of connector.
Type | Requirement | |
W x H x D (mm) | Remark | |
N: 2~N: 32 | 1U, (482±2) mm x (44±0.5) mm x (200±2) mm | width of rack without bracket is 433mm, tolerances is ±2mm. |